DFI LanParty LT X38 series Manuel d'utilisateur

DFI Lanparty UT/LT X48-T3R BIOS Setting Guideline (BIOS version: 2008/8/29) V001 ¾ Pressing DEL at DFI UT/LT X38 LOG screen to login BIOS setup screen

CPU VTT Voltage: Vcore drop control: Enable / Disabled Enabling to control Vout level by PWM, disabling to get a maximum output. Clockgen voltage

¾ Manual GTL Voltage Table: For details, please link to: http://dfics.dfi.com.tw/dfi_cs/LTX48/X38X48_vtt.xls ¾ BIOS Reloaded function: DFI Lan Par

User define setting bank #1 ~ #4: 1. Bank Description: There are 4 rows for writing a short description. Double click on row when this row is empty,

End

¾ Genie BIOS settings: This setup thread is combined all needed settings for over clocking (CPU speed setting, CPU features, DRAM timings, Voltage

value to boot system. CPU Clock ratio: CPU multiplier setting, 6~11 for locked processors, 6~50 times for unlocked processors CPU N/2 Ratio: Disable

DRAM Speed: PCIE Clock: PCIE Slot Config: PCIE 2 and PCIE 4 transferring status: 1X 1X : PCIE 2 / 4 are running with 1X model 4X NC: PCIE

¾ CPU Feature: (For gaining a maximum CPU utilization, we will always disable all CPU key features except “Core multi-Processing”) ¾ DRAM Timing

Enhance Addressing: Auto / Normal / First DFI specifically designed a “fine-tune mode” for DATA addressing, “Normal” for lowest performance, “Fast” fo

Fine Delay Step Degree: Scale gap from 5ps ~80ps, each scale can be able to adjust 31 degree steps. How to use it? For example: if you would

The BIOS will automatically calculate a parameter after system boot up. The BIOS will show the current value of this parameter. The best tuning rang

CPU VID Control range: 0.90V ~ 1.60V CPU VID Special Add Limit: Enable / Disable CPU special add rage, Enable to 114% maximum, Disable